10 10 10 Community

Asma @assmabor ?

active 8 years, 7 months ago

Viewing item 181 to 200 (of 206 items)

← 1 … 9 10 11 →

Darya-Stepanova joined the group Setup Support 13 years, 8 months ago · View
Ellen-Grumert joined the group Setup Support 13 years, 8 months ago · View
Ainara Gonzalez joined the group Setup Support 13 years, 8 months ago · View
Manfred-Schoenheits posted an update in the group Setup Support: 13 years, 8 months ago · View

Hi,
we are currently studying the patch for the ns-3 simulator, on the one hand to get a better understanding of the system as a whole, but also because we would like to run some simulations using the patched ns-3 separately, i.e. just the C2C protocol stack. Unfortunately, it`s not easy to get an idea of how the protocol stack works, there are some examples anyway, but e.g. the doxygen documentation is far from being complete. So i wanted to ask if maybe there`s some additional documentation available ? Thanks in advance,

Best regards,
Manfred
Manfred-Schoenheits joined the group Setup Support 13 years, 8 months ago · View
- Ainara Gonzalez · 13 years, 8 months ago
  Hi Manfred,
  At this moment, apart from iTETRIS specific guidelines and examples there is no additional documentation. Nevertheless, in future realeases we will try to upgrade the documentation in doxygen.
  Thank you for your feedback and interest in iTETRIS platform.
  Best regards,
  Ainara
Rouah joined the group Bug reports 13 years, 9 months ago · View
Manfred-Schoenheits posted an update in the group Bug reports: 13 years, 9 months ago · View

Hello everyone, i´m having almost the same problem, but i also get a segmentation fault when running the demo application:

STEP 8 – SIMULATION PHASE – Tics = 100
GeoRoutingProtocol: RouteOutput => geounicast
UTILS: distance of neighbor 0 to destination = 13.1529
UTILS: the min dist to dest = 13.1529 and is provided by node 0
iCS –> #Error while receiving command: tcpip::SocketNs3::receive() @ recv: Success[ERROR] ScheduleResult() Error while scheduling id based Txon
iCS –> [ERROR] ProcessApplicationResults()Segmentation fault

Here´s my setup:
Ubuntu 10.10 – Kernel 2.6.35-22
ns-3 3.7
sumo 0.12.2
iCS sources 16. Feb 2011

I also needed to use Lukas´ workaround for sumo regarding the xerces libraries.

Best regards,
Manfred
- Julen Maneros · 13 years, 9 months ago
  Hello Manfred,
  
  Thank you for your feedback.
  
  We are working on it. I will try to reproduce your error and try to come back ASAP.
  
  Best regards,
  Julen.
  - Muhammad-Arafat · 13 years, 7 months ago
    Hello Julen, were you ever able to figure out how to solve this problem?? We have just adopted iTETRIS, and it would be nice if I were able to run the demo app for my professor.
    
    Kind regards,
    Muhammad.
Manfred-Schoenheits joined the group Bug reports 13 years, 9 months ago · View
Lukas-Worle posted an update in the group Bug reports: 13 years, 9 months ago · View

I experienced the following problem while running the iCS demo application:

iCS –> Global simulation timestep is: 99; last step is: 3000
================================================
STEP 5 – SIMULATION PHASE – Tics = 99
STEP 6 – SIMULATION PHASE – Tics = 99
0.000000
0.000000
STEP 7 – SIMULATION PHASE – Tics = 99

STEP 8 – SIMULATION PHASE – Tics = 99
STEP 9 – SIMULATION PHASE – Tics = 99
iCS –> Global simulation timestep is: 100; last step is: 3000
================================================
STEP 5 – SIMULATION PHASE – Tics = 100
STEP 6 – SIMULATION PHASE – Tics = 100
STEP 7 – SIMULATION PHASE – Tics = 100

STEP 8 – SIMULATION PHASE – Tics = 100
GeoRoutingProtocol: RouteOutput => geounicast
UTILS: distance of neighbor 0 to destination = 13.1529
UTILS: the min dist to dest = 13.1529 and is provided by node 0
iCS –> [ERROR] ProcessApplicationResults()
ns-3 server –> Finishing server….

Success.
Elapsed time (in seconds): 11.000000
Error: Socket exception: tcpip::Socket::receive() @ recv: Success
Step #101.00 (0ms ?*RT. ?UPS, vehicles TOT 58 ACT 42)

This seems to be a problem with the demo application, since it is supposed to start at time step 100 (as defined in itscoopdemoapp-config-file.xml). Are there any solutions for this problem? Maybe there is something wrong in one of the configuration files?

There is also no file ’configGeneral.xml’ like specified in the itetris-config-file. Can the configGeneral.txt be used?

Regards,
Lukas
- Sherin Abdel Hamid · 12 years, 7 months ago
  Hi Lukas,
  I’m stuck with the same problem, did you manage to solve it?
Julen Maneros joined the group Bug reports 13 years, 9 months ago · View
Dennis-Sluijsmans started the forum topic [facilities] ERROR: The loaded map does not contain any lane! in the group Setup Support: 13 years, 9 months ago · View

If I use the ReceivedCamInfo Subscription, as soon as a node receives a CAM message the iCS program results in a ” ERROR: The loaded map does not contain any lane!” error. Although there’s no filenotfound error for the sumo xml file, it looks like the iCS initiated no map at all. I’m using the [...]
Dennis-Sluijsmans started the forum topic Roadmap in the group Setup Support: 13 years, 9 months ago · View

Hi all,

Although the iTETRIS simulator is a great tool already, some core improvements and additional application support functionality could ease the development of new applications.

It would be appreciated if people responsible for the releases could give an indication of the planned (and requested) improvements by means of a roadmap.

Cheers,
Dennis
Dennis-Sluijsmans joined the group Setup Support 13 years, 9 months ago · View
Lukas-Worle posted an update in the group Setup Support: 13 years, 9 months ago · View

Some issues about the ITS Cooperative Demo Application:

I needed to run the configure command again with the additional xerces-path:
./configure –with-xerces-libraries=”/usr/local/lib -lxerces-c”

in src/foreign/tcpip/socket.h:
there seems to be a problem in line 30 during compilation with the include of ”windows_config.h”. Is this correct here? Or should one rather use the ”config.h”?

When trying to execute the Demo App, demoapp is not found, because it does not exist. It is named itscoopdemoapp. ”sudo ln -s itscoopdemoapp demoapp” in /usr/local/lib does the trick.

But still, there is the following error:

Loading configuration… done.
sumo: Kein Prozess gefunden
main-inci5: Kein Prozess gefunden
java: Kein Prozess gefunden

WELCOME TO iTETRIS
==================
STEP 1 – SETUP PHASE
iCS –> SUMO launched.
iCS –> ns-3 launched.

STEP 2 – SETUP PHASE
Loading configuration… done.
ITS Cooperative Demo App 0.1.0
(c) iTETRIS consortium 2008-2010; http://www.ict-itetris.eu/
(c) DLR 2001-2010; http://sumo.sf.net
Use –help to get the list of options.
1982
Installer type=ns3::WaveVehicleInstaller name=WaveVehicle
Pathfile=confWaveVehicle2.xml
Error at xmlReaderForFile
Segmentation fault

STEP 3 – SETUP PHASE
iCS –> Trying 0 to connect SUMO on port 5500…
iCS –> Connected to SUMO

iCS –> Trying 0 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Trying 1 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Trying 2 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Trying 3 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Trying 4 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Trying 5 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Trying 6 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Trying 7 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Trying 8 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Trying 9 to connect ns-3 on port 1982 and Host localhost…
iCS –> No connection to ns-3; waiting…
iCS –> Could not connect to Ns-3

Step #0.00Warning: period and repno are deprecated in vehicle ’1-4’, use flows instead.

Lukas
- Julen Maneros · 13 years, 9 months ago
  Hi Lukas,
  
  The connection does not take place because there is a segmentation fault at the beginning tha prevents the start of ns-3. I will have a look at that ASAP. Probably some file is missing.
  
  Sincerely,
  
  Julen.
  - Lukas-Worle · 13 years, 9 months ago
    Hey Julen,
    
    I found the missing files in /ns-allinone-3.7/ns-3.7/scratch. After having copied them to /its_demo_app_0.1.0/example/ns-3_files, I get the following output:
    
    Loading configuration… done.
    sumo: Kein Prozess gefunden
    main-inci5: Kein Prozess gefunden
    java: Kein Prozess gefunden
    
    WELCOME TO iTETRIS
    ==================
    STEP 1 – SETUP PHASE
    iCS –> SUMO launched.
    iCS –> ns-3 launched.
    
    STEP 2 – SETUP PHASE
    Loading configuration… done.
    ITS Cooperative Demo App 0.1.0
    (c) iTETRIS consortium 2008-2010; http://www.ict-itetris.eu/
    (c) DLR 2001-2010; http://sumo.sf.net
    Use –help to get the list of options.
    1982
    Installer type=ns3::WaveVehicleInstaller name=WaveVehicle
    Pathfile=confWaveVehicle2.xml
    Installer type=ns3::WaveRsuInstaller name=WaveRsu
    Pathfile=confWaveRsu.xml
    Installer WaveRsu will be related with installer WaveVehicle
    Installer type=ns3::WifiVehicleInstaller name=WifiVehicle
    Pathfile=confWifi.xml
    Installer type=ns3::UmtsBsInstaller name=UmtsBs
    Pathfile=confUmtsBs.xml
    Installer type=ns3::DvbhVehicleInstaller name=DvbhVehicle
    Pathfile=confDvbhVehicle.xml
    Installer type=ns3::DvbhBsInstaller name=DvbhBs
    Pathfile=confDvbhBs.xml
    Installer type=ns3::UmtsVehicleInstaller name=UmtsVehicle
    Pathfile=confUmtsVehicle.xml
    Installer type=ns3::WifiBsInstaller name=WifiBs
    ’file’ attribute has not been found for installer WifiBs
    Installer type=ns3::ItetrisNetworkTransportInstaller name=NetTrans
    ’file’ attribute has not been found for installer NetTrans
    Installer NetTrans will be installed by default in every new node
    Installer type=ns3::MobilityModelInstaller name=Mobility
    ’file’ attribute has not been found for installer Mobility
    Installer Mobility will be installed by default in every new node
    
    STEP 3 – SETUP PHASE
    iCS –> Trying 0 to connect SUMO on port 5500…
    iCS –> Connected to SUMO
    
    iCS –> Trying 0 to connect ns-3 on port 1982 and Host localhost…
    iCS –> Connected to ns-3
    
    iCS –> Trying 0 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Trying 1 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Trying 2 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Trying 3 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Trying 4 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Trying 5 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Trying 6 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Trying 7 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Trying 8 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Trying 9 to connect Application on port 1986…
    iCS –> No connection to Application; waiting…
    iCS –> Could not connect to the Applications
    
    Step #0.00Warning: period and repno are deprecated in vehicle ’1-4’, use flows instead.
    ns-3 server –> Finishing server….
    iCS –> Error occurred during iCS set-up
    Quitting (on error).
    Elapsed time (in seconds): 3.000000
    - Lukas-Worle · 13 years, 9 months ago
      I got it working now.
      Had to change the executable command in application-config-file.xml to
      
      demoapp -c itscoopdemoapp-config-file.xml
      
      and the socket value in itscoopdemoapp-config-file.xml to
      
      socket value=”1986”
      
      Julen Maneros · 13 years, 9 months ago
      Thanks Lukas for the heads up. We are going to update the source soon with your comments.
      
      Thank you!
      
      Asif-Sardar · 12 years, 9 months ago
      Can you please tell me which version of SUMO are you using?
      
      I get error with sumo, ”the tags in configuration files are deprecated”. Someone told me to install correct version of SUMO or reconfigure the files. Do you know which version of SUMO are you using.
      
      Sherin Abdel Hamid · 12 years, 7 months ago
      Hello,
      
      I had the same problem and managed to get ns3 and app connected but now I get this error
      
      STEP 4 – SETUP PHASE
      Error: Answered with error to command 8 Wrong position in requestMessage after dispatching command. Expected command length was 28 but 14 Bytes were read.
      .. Sent command is not implemented (8), [description: ]
      iCS –> [ERROR] SetFixedStationInNs3() Error in the message to create fixed station in ns-3
      iCS –> ERROR setting fixed stations in ns-3
      
      Step #0.00Warning: period and repno are deprecated in vehicle ’1-4’, use flows instead.
      iCS –> #Error while receiving command: tcpip::SocketNs3::receive() @ recv: SuccessiCS –> [ERROR] CloseNs3() Finishing NS-3
      iCS –> Error occurred during iCS set-up
      Quitting (on error).
      Elapsed time (in seconds): 3.000000
      shereen@ubuntu:~/iTETRIS_Platform_0.1.0/its_demo_app_0.1.0/example$ Error: The vehicle type ’dist’ for vehicle ’1-4’ is not known.
      Quitting (on error).
      
      any suggestion? your help will be greatly appreciated
Lukas-Worle posted an update in the group Setup Support: 13 years, 9 months ago · View

As expected, the workaround for the sumo xerces-libs crashed during runtime. However, I found the solution for the problem. The sumo Makefile has the following entries after the ./configure command specified in the iTetris guidline:

XERCES_CFLAGS = -I/usr/local/include
XERCES_LDFLAGS =
XERCES_LIBS = -L/usr/local/lib -lxerces-c

Sumo couldn’t find the correct path for the libxerces, since it apparently wanted it specified in the XERCES_LDFLAGS. This can be achieved by changing the configure command to the following:

./configure –with-fox-includes=/usr/include/fox-1.6 –with-gdal-includes=/usr/include/gdal –with-proj-libraries=/usr –with-gdal-libraries=/usr –with-proj-gdal –with-xerces-libraries=”/usr/local/lib -lxerces-c”

Regards,
Lukas
- Julen Maneros · 13 years, 9 months ago
  Hello again Lukas… this look likes a related question to SUMO rather than iCS. Anyway thanks for the workaround, we will include it in the guidelines so future users can take advantage of your work. Thank you very very much.
Michael-Oppermann posted an update in the group Setup Support: 13 years, 9 months ago · View

Hello,

I would test my installation with the ITS Cooperative Demo Application but I can’t find it in the iTETRIS_Platform_0.1.0.zip. Where can I download this Application?

Regards
Michael
- Julen Maneros · 13 years, 9 months ago
  Hello Michael,
  
  The app is now added to the source code.
  
  Now the libraries folder and the rest of the code is separated so you do not have to download the libraries again which is quite large.
  
  Thank you for using iTETRIS.
  
  Regards,
  
  Julen.
  - Michael-Oppermann · 13 years, 9 months ago
    Hello Julen,
    
    thank you for your answers. I tried to start the ITS Cooperative Demo Application (iCS -c itetris-config-file.xml) and get an error. The app is not able to connect the NS3 on port 1982.
    The error causes probably by a previous error on step 2 – setup phase.
    
    WELCOME TO iTETRIS
    ==================
    STEP 1 – SETUP PHASE
    iCS –> SUMO launched.
    iCS –> ns-3 launched.
    
    STEP 2 – SETUP PHASE
    main-inci5: error while loading shared libraries: libns3.so: cannot open shared object file: No such file or directory
    sh: demoapp: not found
    Loading configuration… done.
    
    STEP 3 – SETUP PHASE
    iCS –> Trying 0 to connect SUMO on port 5500…
    iCS –> Connected to SUMO
    O
    
    iCS –> Trying 0 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Trying 1 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Trying 2 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Trying 3 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Trying 4 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Trying 5 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Trying 6 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Trying 7 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Trying 8 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Trying 9 to connect ns-3 on port 1982 and Host localhost…
    iCS –> No connection to ns-3; waiting…
    iCS –> Could not connect to Ns-3
    
    I tried to start the NS3 before the ITS Cooperative Demo Application with the main-inci5 app in the NS3 scratch folder and get an error during the start of the app (./waf –run scratch/main-inci5):
    
    No port or log file for ns-3 server introduced.
    Format is: main-inci3 [port-number] [fileGeneralParameters] [fileConfTechnologies] OPTIONAL [log-path]
    Exiting…
    
    Is it nessessary to start the NS3 before Demo Application or start the Demo Application the NS3 automaticly (like the SUMO)?
    
    I found the ”communicationsim” tag in the itetris-config-file.xml and I noticed the ”communication-general-params-file” tag.
    
    ”communicationsim”
    ”communication-executable value=”main-inci5”/”
    ”communication-host value=”localhost”/”
    ”communication-port value=”1982”/”
    ”communication-general-params-file value=”./ns-3_files/configGeneral.xml”/”
    ”communication-config-technologies-file value=”./ns-3_files/configTechnologies-ics.xml”/”
    ”/communicationsim”
    
    I replaced the brackets of the tags with ” because of your forum-editor hide all xml-tags
    
    I have no configGeneral.xml in my ns-3_files folder!
    
    Regards
    
    Michael
    - Lukas-Worle · 13 years, 9 months ago
      Hey Michael,
      
      I had the same error at first, although the libns3.so was in /usr/local/lib. However, a symbolic link in the /usr/lib folder pointing at the libns3.so helped to eliminate this error. I suppose the demo application just searches the /usr/lib – folder.
      
      cd /usr/lib
      sudo ln -s /usr/local/lib/libns3.so libns3.so
      
      For the remaining errors I suppose, that some configuration files (the ones described in the documentation) are still missing.
      
      Julen, please correct me, if I’m wrong here
      
      Regards,
      Lukas
Lukas-Worle posted an update in the group Setup Support: 13 years, 9 months ago · View

Hey Julen,

thank you for the previous answers. It works fine now. I managed to install the iCS and the ns3.7 with the patch. Unfortunately, I have still some problems compiling the sumo. ’configure’ works fine, but I get an error when I try to run the ’make’ command, rather at the end, after the script entered the ../src/netgen directory. There are undefined references concerning the xerces-lib. I installed the one from the iTetris download and also the one required for the sumo-installation. Is there something else I need to consider?

Regards,
Lukas
- Lukas-Worle · 13 years, 9 months ago
  It seems to be a problem between the xerces-c-3.0.1 (from the iTetris installation) and the one needed for sumo (libxerces-c2-dev). I guess, sumo accesses the xerces-c-3.0.1-headers during the build process. I try to find out more on that and post a solution, if I can find one.
  Have a nice weekend everyone!
  - Lukas-Worle · 13 years, 9 months ago
    It’s working now, but still not an optimal solution.
    I’ve removed the folder /usr/local/include/xercesc during installation of sumo 0.12.2 and moved it back afterwards. Maybe this could also be solved by simply telling the compiler the correct path to the libxerces 2.8 for sumo. I didn’t manage to do this, though. Hopefully this won’t cause any problems during run-time. Does anyone else has the same problem or am I the only one?
    
    Lukas
    - Julen Maneros · 13 years, 9 months ago
      Thank you Lukas for this solution. We will have into account to enhance a troubleshooting guide.
      
      Julen.
      
      Lukas-Worle · 13 years, 9 months ago
      fixed: see http://www.ict-itetris.eu/10-10-10-community/members/lukas-worle/activity/106/
svaz joined the group Setup Support 13 years, 9 months ago · View
Michael-Oppermann posted an update in the group Setup Support: 13 years, 9 months ago · View

I have a new problem, which is the right ns-3 version?
I use the ns-3 Version 3.7 because of the paths in the iTetris-ns3_0.1.1.patch (for example ”diff -rupN ns-3.7/src/…”). Is it right?

The patch failed with this output:

Hunk #1 FAILED at 49.
Hunk #2 FAILED at 176.
Hunk #3 FAILED at 216.
Hunk #4 FAILED at 1000.
Hunk #5 FAILED at 1033.
Hunk #6 FAILED at 1047.
Hunk #7 FAILED at 1130.
Hunk #8 FAILED at 1161.
8 out of 8 hunks FAILED — saving rejects to file bindings/python/apidefs/gcc-ILP32/ns3_module_common.py.rej
patching file bindings/python/apidefs/gcc-ILP32/ns3_module_core.py
Hunk #1 FAILED at 93.
Hunk #2 FAILED at 351.
Hunk #3 FAILED at 1575.
3 out of 3 hunks FAILED — saving rejects to file bindings/python/apidefs/gcc-ILP32/ns3_module_core.py.rej

…

The next patch would delete the file scratch/simple.cc,
which does not exist! Assume -R? [n]
- svaz · 13 years, 9 months ago
  The right version of ns-3 is ns-3.7 as you stated. Can you write the command your are executing to apply the patch? Have you downloaded the ns-alllinone-3.7 version and applied the patch to the ns-3 folder located within it?
  
  BR,
  
  Sendoa
  - Michael-Oppermann · 13 years, 9 months ago
    I downloaded the ns-allinone-3.7 and applied the patch in the root directory of the ns-allinone-3.7.
    
    I used the command from the iTetris_Guidelines0.1.0.pdf:
    
    ./configure –enable-sumo –enable-ns3 –enable-applications -with-geographic=/usr/local –enable-log
    - svaz · 13 years, 9 months ago
      In order to apply the patch correctly enter the ns-allinone-3.7/ns-3.7 folder. Once you are there apply the patch. I guess the command you wrote is related to the other you have, have you checked you have installed all the necessary packages?
      
      Michael-Oppermann · 13 years, 9 months ago
      Sorry I wrote the wrong command. I used this one for the patch:
      patch -p1 -i iTETRIS-ns3_0.1.1.patch
      
      It works fine if I apply the patch in the ns-allinone-3.7/ns-3.7 folder.
      
      Thanks
Michael-Oppermann posted an update in the group Setup Support: 13 years, 9 months ago · View

I have the same problem.

”make -f Makefile.cvs” returns the same output and the configure command returns:

…
config.status: creating src/ics/facilities/mapFacilities/Makefile
config.status: creating src/ics/facilities/mapFacilities/road/Makefile
config.status: creating src/ics/facilities/stationFacilities/Makefile
config.status: creating src/ics/facilities/messageFacilities/Makefile
config.status: error: cannot find input file: `Makefile.in

Is a solution or a workaround avaliable?

Thanks
Micha
- Julen Maneros · 13 years, 9 months ago
  Hi Michale. Thanks for using iTETRIS. Sorry about the error, there was one file missing that prevented the proper building. Please download the platform and try again.
  
  Regards,
  
  Julen.
  - Michael-Oppermann · 13 years, 9 months ago
    Hi Julen, thanks for the answer.
    
    I downloaded the new source and get a new Error during the make-command: make -f Makefile.cvs
    
    autoreconf -i
    libtoolize: putting auxiliary files in `.’.
    libtoolize: copying file `./config.guess’
    libtoolize: copying file `./config.sub’
    libtoolize: copying file `./install-sh’
    libtoolize: copying file `./ltmain.sh’
    libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])’ to configure.ac and
    libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
    libtoolize: Consider adding `-I m4’ to ACLOCAL_AMFLAGS in Makefile.am.
    libtoolize: `AC_PROG_RANLIB’ is rendered obsolete by `LT_INIT’
    configure.ac:10: installing `./missing’
    src/Makefile.am: installing `./depcomp’
    Makefile.am: installing `./INSTALL’
    Makefile.am: required file `./NEWS’ not found
    Makefile.am: required file `./README’ not found
    Makefile.am: required file `./AUTHORS’ not found
    Makefile.am: required file `./ChangeLog’ not found
    Makefile.am: installing `./COPYING’ using GNU General Public License v3 file
    Makefile.am: Consider adding the COPYING file to the version control system
    Makefile.am: for your code, to avoid questions about which license your project uses.
    autoreconf: automake failed with exit status: 1
    make: *** [all] Error 1
    
    And the configure-command failed too:
    ./configure –enable-sumo –enable-ns3 –enable-applications -with-geographic=/usr/local –enable-log
    
    configure: WARNING: you should use –build, –host, –target
    configure: WARNING: invalid host type: –enable-log
    checking build system type… Invalid configuration `–enable-log’: machine `–enable’ not recognized
    configure: error: /bin/bash ./config.sub –enable-log failed
    - Lukas-Worle · 13 years, 9 months ago
      I have the same problem. Any solutions?
      
      Julen Maneros · 13 years, 9 months ago
      HI Lukas and Michael. Sorry for the errors. With the new upload should work now.
Load More

Asma @assmabor ?

Who's Online Avatars

Lately at 10-10-10 Community